|
| GN9000-P Gas Alarm Controller |
 |
| Click on View [ Dimension & Mounting / wiring terminal ] |
| |
| ■
Characteristic： |
| |
| ● |
Large LCD displays the status and concentration with white backlight |
● |
8 Programmable Linkage Output Interfaces, contact capacity is 10A 24VDC or 5A 250VAC |
|
| ● |
Easy to understand that users operating function |
● |
Modularization design method, The function that the whole software regulates |
|
| ● |
Standard signal input(4～20mA/Modbus) |
● |
Automatically record the time of power on, power off, alarm and fault, keeping without power |
|
| ● |
Convenient operation mode and reliable touch screen |
|
|
|
| |
| ■
Working theory： |
| |
| GN9000-P Gas Alarm Controller, sample & deal with the signal of 4～20mA or RS485 bus from detectors,transform to consistency of gas around detectors,display the value of gas consistency & all kinds of system status on LCD,gives out audio and visual alarm signal ,and output linkage controlling signal if fault or alarm occurs.. GN9000-B? gas control Controller can match the GN8010-C、GN8010-E、GN8020-C、GN8020-E、 GN8050、GN8010-R gas detector. And through RS485 or direct access to the DCS system, PLC or host computer communication systems, network management |
| |
| ■
Specification： |
| |
| Signal Input |
4～20mA/Modbus |
| Display range |
Digital 0～99999,Unit: %LEL、ppm、%v-v |
| Accuracy |
±1%FS |
| Operation Mode |
Touch Button |
| Display Mode |
White backlight,LCD display the status of every loop one by one |
| Control Channel |
8/16/32/64 channels |
| Alarm setting |
Low limit A1 Alarm (Default 25% F.S.,Adjustable),High limit A2 Alarm (Default 50% F.S.,Adjustable) |
| Output Control |
Maximum 8 programmable relays, each relay has normal open mode/normal close mode and level mode/pulse mode. |
| Automatic Detection |
Open/short circuit, lack of voltage, detector status etc. |
| Alarm Mode |
Audio-visual alarm |
| Output interface |
RS485 |
| Working Temperature |
-20℃～+50℃ |
| Relative Humidity |
0～95%RH (Non-condensing) |
| Power Supply |
AC220V±20%/50Hz |
| Maximum Power supply Consumption |
10W |
| Standby Power Supply |
DC24V 1.2Ah(Optional) |
| Weight |
Approximately 5Kg |
| Install Mode |
Panel mounting |
| Opening size |
136mm*136mm(L*W) |
| Dimensions |
144mm*144mm*150mm(L*W*H) |
|
| |
|
|
|
