| GN8010-E Toxic Gas Detector |
 |
| Click
on View [ Dimension
& Mounting / wiring terminal/The type of gas ] |
| |
| ¡ö
Characteristic£º |
| |
| ¡ñ |
0¡¢2¡¢4¡«20¡¢22mA current/mod-bus
signal output |
¡ñ |
automatism safeguard function
to defend the impact from high chroma gas |
|
| ¡ñ |
2 cable entries
convenient to install |
¡ñ |
Independent gas chamber structure,
and the sensor is easy to replace |
|
| ¡ñ |
1 Programmable
Linkage Output Interface |
¡ñ |
Automatic zero-tracing, temperature
compensating |
|
| ¡ñ |
Explosion Prevention
Mark Exd¢òCT6 |
¡ñ |
Own intellectual property rights
with self-determination |
|
| |
| ¡ö
Working theory£º |
| |
GN8010-E
Combustible Gas Detector First sample the signal from
sensor,then deal the signal with the internal data processing,
final output the consistence of ambient air by the signal
such as 4¡«20mA , Mod-bus data frame.
The GN8010-C can use in system with our company's GN90000-W¡¢GN90000-S
gas controller. Otherwise, through Linkage Output of relay,
the GN8010-C can be joined with the host of fire control,
and cut-over fire control system immediacy. |
| |
| ¡ö
Specification£º |
| |
| Detecting
Theory |
Electrochemical type |
| Measurement
Range |
0¡«1000ppm £¨Re. appendix£© |
| Accuracy |
¡À3%FS |
| Response
Time |
¡Ü60s |
| Recovery
Time |
¡Ü60s |
| Setting
Mode |
Dial Switch£«Key |
| Alarm setting |
1-Stage alarm (default 25%F.S.,adjustable) |
| Alarm Mode |
1-stage alarm passive relay output contact (A1),contact
capacity 1A 24VDC(Optional) |
| Explosion
Prevention Mark |
Exd¢òCT6 |
| Explosion
Prevention Screw Thread |
3/4"NPT/M20 |
| Output Control |
4¡«20mA standard current(2 or 3 wires)(Max.load
500¦¸)or Modbus communication interface(4 wires) |
| Transmission
Distance |
Max.10000m(2.5mm2 copper cable) |
| Working Temperature |
-40¡æ¡«+70¡æ |
| Relative Humidity |
20%¡«95%RH |
| Power Supply |
24VDC¡À8VDC |
| Maximum Power supply Consumption |
1W |
| Weight |
Approximately 1.5Kg |
|
| |
